Site furniture
Elegant and long-lived seating accommodations for stops for local transport or for public places and squares and in public parks.
Single seats or siting benches, with or without folding function, seating areas made out of wire mesh, wood or aluminium, ground installed or wall mounted. Products of KLAPPSITZ.de are always robust, low maintenance and are aesthetically pleasing.
Stiff breeze from the north? No
problem.
The cathartic dip coating (KTL) protects against corrosion which makes our site furniture seats and sitting benches extremely long-lived even in rough sea climate.
Site furniture products from KLAPPSITZ.de find their ideal application in:
- bus stops
- train stations
- schools and kindergardens
- universities
- parks and green areas
- public swimming pools
Often it is small details which must be kept in mind when looking for an ideal sitting solution. Whether or not the folding function or a locked seat is preferable is often depending on the application of the seats. Are there any restrictions that need to be considered? E.g. is there a minimum width of the pedestrian walkway that needs to be adhered to? Should the misuse as a sleeping opportunity be restricted?
Please don’t hesitate to contact us
to profit from our experience.
Specifications and dimension sheets for download
Please feel free to contact us. We would like to support you in the analysis and planning and finding your suitable product.
„Palati“ with wire-mesh sitting surface
Floor mounted sitting benches (fold down seats and rigid seats)
Single fold down sitting bench with wire mesh sitting surface and back rest
model: 131-01
zur DetailseiteThis bench is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area is brought back into the resting position by means of springs.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Single fold down sitting bench with wire mesh sitting surface
model: 131-02
zur DetailseiteThis bench is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area is brought back into the resting position by means of springs.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Single rigid sitting bench with wire mesh sitting surface and back rest
model: 131-11
zur DetailseiteThis bench, fitted with a seating area that isn’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.Single rigid sitting bench with wire mesh sitting surface
model: 131-12
zur DetailseiteThis bench, fitted with a seating area that isn’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Single rigid sitting bench with wire mesh sitting surface, back rest and arm rests
model: 131-21
zur DetailseiteThis bench, fitted with a seating area that isn’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Single rigid sitting bench with wire mesh sitting surface and arm rests
model: 131-22
zur DetailseiteThis bench, fitted with a seating area that isn’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome fold down sitting bench with wire mesh sitting surface and back rest
model: 132-01
zur DetailseiteThis bench is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome fold down sitting bench with wire mesh sitting surface
model: 132-02
zur DetailseiteThis bench is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome rigid sitting bench with wire mesh sitting surface and back rest
model: 132-11
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome rigid sitting bench with wire mesh sitting surface
model: 132-12
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome rigid sitting bench with wire mesh sitting surface, back rest and arm rests
model: 132-21
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome rigid sitting bench with wire mesh sitting surface and arm rests
model: 132-22
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome fold down sitting bench with wire mesh sitting surface and back rest
model: 133-01
zur DetailseiteThis bench is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome fold down sitting bench with wire mesh sitting surface
model: 133-02
zur DetailseiteThis bench is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome rigid sitting bench with wire mesh sitting surface and back rest
model: 133-11
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome rigid sitting bench with wire mesh sitting surface
model: 133-12
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome rigid sitting bench with wire mesh sitting surface, back rest and arm rests
model: 133-21
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome rigid sitting bench with wire mesh sitting surface and arm rests
model: 133-22
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome fold down sitting bench with wire mesh sitting surface and back rest
model: 134-01
zur DetailseiteThis bench is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome fold down sitting bench with wire mesh sitting surface
model: 134-02
zur DetailseiteThis bench is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome rigid sitting bench with wire mesh sitting surface and back rest
model: 134-11
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome rigid sitting bench with wire mesh sitting surface
model: 134-12
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome rigid sitting bench with wire mesh sitting surface, back rest and arm rests
model: 134-21
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome rigid sitting bench with wire mesh sitting surface and arm rests
model: 134-22
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Wall mounted sitting benches (fold down seats and rigid seats)
Fold down seat with wire-mesh sitting surface; wall-mounted
model: 007-76
list moreSeat made from all-metal. This unit is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2.
The seating area is brought back into the resting position by means of springs.
Fold down seat with wire-mesh sitting surface and back rest; wall-mounted
model: 124-10
list moreSeat and back rest made from all-metal. This unit is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2.
The seating area is brought back into the resting position by means of springs.
Twosome fold down sitting bench with wire mesh sitting surface and back rest
model: 152-01
list more
This bench is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.Twosome fold down sitting bench with wire mesh sitting surface
model: 152-02
list more
This bench is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.Threesome fold down sitting bench with wire mesh sitting surface and back rest
model: 153-01
list moreThis bench is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.Threesome fold down sitting bench with wire mesh sitting surface
model: 153-02
list moreThis bench is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.Foursome fold down sitting bench with wire mesh sitting surface and back rest
model: 154-01
list moreThis bench is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.Foursome fold down sitting bench with wire mesh sitting surface
model: 154-02
list moreThis bench is made entirely from metal and is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
„Palati“ with smooth aluminium sitting surface
Floor mounted sitting benches (fold down seats and rigid seats)
Single fold down sitting bench with smooth aluminium sitting surface and back rest
model: 131-05
zur DetailseiteThis bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating area can heat up or cool down considerably depending on the influence of the weather. In some cases the wire-mesh seating area can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area is brought back into the resting position by means of springs.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Single fold down sitting bench with smooth aluminium sitting surface
model: 131-06
zur DetailseiteThis bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating area can heat up or cool down considerably depending on the influence of the weather. In some cases the wire-mesh seating area can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area is brought back into the resting position by means of springs.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Single rigid sitting bench with smooth aluminium sitting surface and back rest
model: 131-15
zur DetailseiteThis bench, fitted with a seating area that isn’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating area can heat up or cool down considerably depending on the influence of the weather. In some cases the wire-mesh seating area can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Single rigid sitting bench with smooth aluminium sitting surface
model: 131-16
zur DetailseiteThis bench, fitted with a seating area that isn’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating area can heat up or cool down considerably depending on the influence of the weather. In some cases the wire-mesh seating area can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Single rigid sitting bench with smooth aluminium sitting surface, back rest and arm rests
model: 131-25
zur DetailseiteThis bench, fitted with a seating area that isn’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating area can heat up or cool down considerably depending on the influence of the weather. In some cases the wire-mesh seating area can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Single rigid sitting bench with smooth aluminium sitting surface and arm rests
model: 131-26
zur DetailseiteThis bench, fitted with a seating area that isn’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating area can heat up or cool down considerably depending on the influence of the weather. In some cases the wire-mesh seating area can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome fold down sitting bench with smooth aluminium sitting surface and back rest
model: 132-05
zur DetailseiteThis bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome fold down sitting bench with smooth aluminium sitting surface
model: 132-06
zur Detailseite
This bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome rigid sitting bench with smooth aluminium sitting surface and back rest
model: 132-15
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome rigid sitting bench with smooth aluminium sitting surface
model: 132-16
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome rigid sitting bench with smooth aluminium sitting surface, back rest and arm rests
model: 132-25
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome rigid sitting bench with smooth aluminium sitting surface and arm rests
model: 132-26
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome fold down sitting bench with smooth aluminium sitting surface and back rest
model: 133-05
zur DetailseiteThis bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome fold down sitting bench with smooth aluminium sitting surface
model: 133-06
zur DetailseiteThis bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome rigid sitting bench with smooth aluminium sitting surface and back rest
model: 133-15
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome rigid sitting bench with smooth aluminium sitting surface
model: 133-16
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome rigid sitting bench with smooth aluminium sitting surface, back rest and arm rests
model: 133-25
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome rigid sitting bench with smooth aluminium sitting surface and arm rests
model: 133-26
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome fold down sitting bench with smooth aluminium sitting surface and back rest
model: 134-05
zur DetailseiteThis bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome fold down sitting bench with smooth aluminium sitting surface
model: 134-06
zur DetailseiteThis bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome rigid sitting bench with smooth aluminium sitting surface and back rest
model: 134-15
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome rigid sitting bench with smooth aluminium sitting surface
model: 134-16
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome rigid sitting bench with smooth aluminium sitting surface, back rest and arm rests
model: 134-25
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome rigid sitting bench with smooth aluminium sitting surface and arm rests
model: 134-26
zur DetailseiteThis bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Wall mounted sitting benches (fold down seats and rigid seats)
Fold down seat with smooth aluminium sitting surface; wall-mounted
model: 119-05
list moreSeat made from all-metal. This unit is well suited for the usage in outdoor areas but one must take into account that the seating area can heat up or cool down considerably depending on the influence of the weather. In some cases the wire-mesh seating area can be the better choice because of the reduced surface area.
All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2.
The seating area is brought back into the resting position by means of springs.
Fold down seat with smooth aluminium sitting surface and back rest; wall-mounted
model: 119-06
list moreSeat and back rest made from all-metal. This unit is well suited for the usage in outdoor areas but one must take into account that the seating area can heat up or cool down considerably depending on the influence of the weather. In some cases the wire-mesh seating area can be the better choice because of the reduced surface area.
All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2.
The seating area is brought back into the resting position by means of springs.
Twosome fold down sitting bench with smooth aluminium sitting surface and back rest
model: 152-05
list moreThis bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.Twosome fold down sitting bench with smooth aluminium sitting surface
model: 152-06
list moreThis bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.Threesome fold down sitting bench with smooth aluminium sitting surface and back rest
model: 153-05
list moreThis bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.Threesome fold down sitting bench with smooth aluminium sitting surface
model: 153-06
list moreThis bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.Foursome fold down sitting bench with smooth aluminium sitting surface and back rest
model: 154-05
list moreThis bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.Foursome fold down sitting bench with smooth aluminium sitting surface
model: 154-06
list moreThis bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
„Woodie“ with beech wood sitting surface
Floor mounted sitting benches (fold down seats and rigid seats)
Single fold down sitting bench with beech wood sitting surface and back rest
model: 131-03
zur DetailseiteBench with a sitting surface and a back rest made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This seat is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating area is brought back into the resting position by means of springs.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Single fold down sitting bench with beech wood sitting surface
model: 131-04
zur DetailseiteBench with a sitting surface made from a synthetic-resin-sealed Pagwood-element. Other elements of the construction are metal. This seat is suited for the use in covered and sheltered outdoor areas. The Pagwood-element is highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating area is brought back into the resting position by means of springs.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Single rigid sitting bench with beech wood sitting surface and back rest
model: 131-13
zur DetailseiteThis bench is fitted with a seating area that isn’t fashioned to fold down. Sitting surface and a back rest are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Single rigid sitting bench with beech wood sitting surface
model: 131-14
zur DetailseiteThis bench is fitted with a seating area that isn’t fashioned to fold down. Sitting surface is made from a synthetic-resin-sealed Pagwood-element. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-element is highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Single rigid sitting bench with beech wood sitting surface, back rest and arm rests
model: 131-23
zur DetailseiteThis bench is fitted with a seating area that isn’t fashioned to fold down. Sitting surface and a back rest are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Single rigid sitting bench with beech wood sitting surface and arm rests
model: 131-24
zur DetailseiteThis bench is fitted with a seating area that isn’t fashioned to fold down. Sitting surface is made from a synthetic-resin-sealed Pagwood-element. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-element is highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome fold down sitting bench with beech wood sitting surface and back rest
model: 132-03
zur DetailseiteBench with sitting surfaces and back rests made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome fold down sitting bench with beech wood sitting surface
model: 132-04
zur DetailseiteBench with sitting surfaces made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome rigid sitting bench with beech wood sitting surface and back rest
model: 132-13
zur DetailseiteThis bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces and back rests are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome rigid sitting bench with beech wood sitting surface
model: 132-14
zur DetailseiteThis bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome rigid sitting bench with beech wood sitting surface, back rest and arm rests
model: 132-23
zur DetailseiteThis bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces and back rests are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Twosome rigid sitting bench with beech wood sitting surface and arm rests
model: 132-24
zur DetailseiteThis bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome fold down sitting bench with beech wood sitting surface and back rest
model: 133-03
zur DetailseiteBench with sitting surfaces and back rests made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome fold down sitting bench with beech wood sitting surface
model: 133-04
zur DetailseiteBench with sitting surfaces made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome rigid sitting bench with beech wood sitting surface and back rest
model: 133-13
zur DetailseiteThis bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces and back rests are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome rigid sitting bench with beech wood sitting surface
model: 133-14
zur DetailseiteThis bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome rigid sitting bench with beech wood sitting surface, back rest and arm rests
model: 133-23
zur DetailseiteThis bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces and back rests are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Threesome rigid sitting bench with beech wood sitting surface and arm rests
model: 133-24
zur DetailseiteThis bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome fold down sitting bench with beech wood sitting surface and back rest
model: 134-03
zur DetailseiteBench with sitting surfaces and back rests made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome fold down sitting bench with beech wood sitting surface
model: 134-04
zur DetailseiteBench with sitting surfaces made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome rigid sitting bench with beech wood sitting surface and back rest
model: 134-13
zur DetailseiteThis bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces and back rests are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome rigid sitting bench with beech wood sitting surface
model: 134-14
zur DetailseiteThis bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome rigid sitting bench with beech wood sitting surface, back rest and arm rests
model: 134-23
zur DetailseiteThis bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces and back rests are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Foursome rigid sitting bench with beech wood sitting surface and arm rests
model: 134-24
zur DetailseiteThis bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
Wall mounted sitting benches (fold down seats and rigid seats)
Fold down seat “Woodie”; wall-mounted
model: 007-81
zur DetailseiteFold down seat with a sitting surface made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This seat is suited for the use in covered and sheltered outdoor areas. The seating area is highly flame retardant.
Fold down seat “Woodie” with back-rest; wall-mounted
model: 128-08
zur DetailseiteFold down seat with a sitting surface and back rest made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This seat is suited for the use in covered and sheltered outdoor areas. The seating area is highly flame retardant.
The seating area is brought back into the resting position by means of springs.
Twosome fold down sitting bench with beech wood sitting surface and back rest
model: 152-03
zur DetailseiteBench with sitting surfaces and back rests made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.Twosome fold down sitting bench with beech wood sitting surface
model: 152-04
zur DetailseiteBench with sitting surfaces made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.Threesome fold down sitting bench with beech wood sitting surface and back rest
model: 153-03
zur DetailseiteBench with sitting surfaces and back rests made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.Threesome fold down sitting bench with beech wood sitting surface
model: 153-04
zur DetailseiteBench with sitting surfaces made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
Foursome fold down sitting bench with beech wood sitting surface and back rest
model: 154-03
zur DetailseiteBench with sitting surfaces and back rests made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.Foursome fold down sitting bench with beech wood sitting surface
model: 154-04
zur DetailseiteBench with sitting surfaces made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
BLECH & TECH GmbH
Niederwaldstraße 4
79336 Herbolzheim, Germany
+49 (0) 76 43 / 33 38 95 - 0
+49 (0)76 43 / 33 38 95 - 11
nfblch-tchd
©2024 BLECH & TECH GmbH